Series 800 “Mighty Mouse” Light Duty

80 Series > 800 Series Light Duty

Features & Benefits

• 3 Through 37 Contacts
• Crimp, Rear Release
• Environmentally Sealed
• 5 Amp Contact for #22 thru #28 Wire, .076” (1.9)
  Contact Centers
• 500 Volt AC
• Aluminum or Stainless Steel

The Series 800 connector is intended for light duty applications where size, weight and cost outweigh the need for the heavy duty Series 801 Double-Start version. Available with 3 to 37 contacts, the Series 800 is ideal for test equipment, instrumentation and sensors. The integral shield termination platform provides direct attachment of cable to the connector. This platform is designed to allow the connector to be overmolded without the need for an adapter.

Series 800 Product Selection Guide

• Cable Plugs
  • Cable Plugs Part Builder
  • Supplied With Crimp Contacts for #22 – #28 AWG Wire
  • Two Styles: Rear Accessory Thread or Integral Band Platform for Direct Attachment of Cable Shield
• Crimp Receptacles
  • Crimp Receptacles Part Builder
  • Supplied With Crimp Contacts for #22 – #28 AWG Wire
  • Two Styles: Rear Accessory Thread or Integral Band Platform for Direct Attachment of Cable Shield
• PCB Receptacles
  • PCB Receptacles Part Builder
  • Supplied With Factory-Installed, Non-Removable Straight PC Tails for Attachment to Rigid Boards or Flex Circuits
• Hermetic Receptacles
  • Hermetic Receptacles Part Builder
  • Supplied With Factory-Installed, Non-Removable Solder Cup
  • Contacts for #22 Gage Wire, or With Straight PC Tails for Attachment to Rigid Boards or Flex Circuits
• Protective Covers
  • Protective Covers Part Builder
  • Plug and Receptacle Covers
  • Variety of Attachment Options
• Cordsets
  • Cordsets Part Builder
  • Overmolded, Shielded Cable Assemblies
  • 100% Tested, Easy to Specify, Ready for Use
• Backshells & Accessories
  • Environmental Backshell
  • Shielded Non-Environmental Backshell
  • Shielded Environmental Backshell
  • Straight Exit Strain Relief Clamps
  • 45° & 90° Strain Relief Clamps
  • Shrink Boot Adapter - Direct Couple
  • Shirnk Boot Adapter - Rotateable
  • Banding / Molding Adapter

Applications

• Instrumentation
• Test Equipment
• Satellites
• Missile Systems
• Avionics
• Sensors
• UAV’s
• Medical Equipment
• Industrial

Series 800 Specifications

Contact Size / Spacing:

• #23 / .076” (1.9) Contact Centers

Wire Accommodation:

• #22—#28 AWG

Current Rating:

• 5 Amps Maxiumum

Voltage Rating (DWV):

• 500 VAC RMS Sea Level
• 100 VAC RMS 70,000 Feet

Insulation Resistance:

• 5000 Megohms Minimum

Operating Temperature:

• -55° C. to +150° C.

Contact Resistance:

• 8 Milliohms Maximum
• 30 Milliohms Maximum (Hermetic)

Vibration:

• 20 g’s, in Accordance with MIL-STD-1344 Method 2005, Condition IV

Shock:

• 50 g’s, in Accordance with MIL-STD-1344 Method 2004, Condition E

EMI Shielding Effectiveness:

• 40 dB Attenuation, 100 MHz to 1000 MHz

Series 800 Materials and Finishes

Contacts:

• Beryllium Copper Alloy, 50 ?Inch Gold Plated per ASTM B488 Type 3, Code C, Class 1,27 over Nickel Underplate per QQ-N-290 Class 2. Socket Contact Hood: Corrosion Resistant Steel, Passivated. Hermetic Pin Contacts: Nickel-Iron Alloy per ASTM-F-30, 50 ?Inch Gold Plated per ASTM B488 Type 3, Code C, Class 1,27

Insulators:

• Liquid Crystal Polymer (LCP) per MIL-M-24519 GLP-30F, 30% Glass-Filled

Rear Sealing Grommet, Interfacial Seal, and O-Ring:

• Flourosilicone Elastomer per A-A-59588, Color Blue

Contact Retention Clip:

• Beryllium Copper Alloy

Shell, Jam Nut Material:

• Aluminum Alloy per ASTM B 211 or ASTM B 221
  or Corrosion Resistant Steel per AMS-QQ-S-763

Shell and Jam Nut Finish:

• Code C: Black Anodize per MIL-A-8625, Type II Class 2 (48 Hour Salt Spray)
• Code M: Electroless Nickel per AMS-C-26074 (96 Hour Salt Spray)
• Code NF: Olive Drab Cadmium per AMS-QQ-P-416 over Electroless Nickel (500 Hour Salt Spray)
• Code ZN: Olive Drab Zinc-Nickel per ASTM B841-91 over Electroless Nickel (500 Hour Salt Spray)
• Code ZNU: Black Zinc-Nickel per ASTM B841-91 over Electroless Nickel (500 Hour Salt Spray)
• Code Z1: Passivate per AMS-QQ-P-35 (1000 Hour salt Spray)