4LV34 Series Strain Reliefs
Part Number Builders > 4LV34 Series Strain Reliefs
Select the Basic Style of Backshell below:
4LV34/B2 |
Staight Strain-Relief BackshellStandard strain relief protection required by all cable plugs or cable connecting receptacles. |
|
|---|---|---|
4LV34/B4 |
90° Degree Strain Relief BackshellRedirect cables 90° to conserve space, and allow for higher panel density. |
|
Features & Benefits
Standard strain relief provide strain relief required of all connectors that terminate at ends of cables, commonly referred to cable plugs or 06 style connectors. On panel mount connectors, unless in high vibration enviornments, they are optional. In high vibration environments they are required on receptacles. The 90° option available to divert the cable when space is constrained.
Environmental Protection
These open strain reliefs do not provide any environmental protection (i.e. moisture, dust, water, etc.) and should only be used when the equipment is in a clean and dry environment, or inside a sealed box.
Compatability
These strain reliefs have thread dimensions compatible with the following types of connectors.
Please note that they are not compatible with MIL-C-5015 solder connectos such MS3100, MS3101, MS3106, and MS3106.
| Series | Part Prefixes |
|---|---|
| MIL-C-5015 Rear Release | MS3450, MS3451, MS3454, MS3456, MS3459 |
| Amphenol 944 Series | 9440, 9441, 9444, 9446, 9816, 9817, 9818 |
Alvatek Electronics has made every effort to assure the accuracy of the information provided. The information contained in this website is to be used for the selection and reference of product only. It is important that you check the specifications of the part numbers suggested to be sure they match your requirements. Alvatek cannot be held responsible for any inaccuracies or changes in the part numbers contained in this website. Use of this part builder constitutes acceptance of our Terms & Conditions.
|
|